jk keeper fitting instructions
The JK Keeper can be mounted beside, above or below the fuses wherever there is enough space to mount it.
Select the side that has the best amount of space, and is most practical to accommodate the Keeper and, using screws provided, screw in where screw holes have been positioned in the base.
Isolate power if necessary!
If mounting beside the fuses,mount in a central position so arm will cover the highest points on the top surface of both fuses as shown in Fig. 1.
If mounting above or below the fuses, mount centrally between the incoming oroutgoing conductors to ensure the arm covers the highest points on the top surface of both fuses as shown in Fig. 2. The shrouds on the end of the fuses may be a minor obstruction to the screwdriver bit and may need to be moved out of the way whilst securing the JK Keeper, then refitted. Fig. 2.
DISCLAIMER
Eagle Alternatives Pty Ltd has provided the above installation procedures to ensure that the JK Keeper is correctly fitted and will operate correctly
Eagle Alternatives PTY LTD is not liable for any improper or incorrect use of its goods arising from, or in relation to, any failure to install or use the goods in accordance with the instructions provided or in relation to any abuse, misuse, unauthorised repair or modifications or damage to the goods from any cause.
Warranty claims must be notified within 6 months of purchase and the goods returned with proof of purchase.
Eagle Alternatives Pty Ltd will refund the price of goods or repair or replace them, as it decides, if the goods have any material or manufacturing defect, natural wear and tear is not included.
Australian owned and patented.
